Room 8, Floor 25, Block A
No.1 Jianshezhong Road
Tiexi District, Shenyang, Liaoning, China
Tel
8624-25757560
8624-85611585
Working Time
Monday ~ Friday：8:30~17:00
Saturday：8:30~12:00
T307
You Are Here：Home > > Products Categories > Lubricant Additive Component > Extreme Pressure Anti-wear Additive
T307
Commodity category：SulPhosphate Complex Ester Amine Salt Extreme Pressure Anti-wear Additive
Number of views：
I. Key Product Benefits
Thiophosphate amide.
High extreme pressure level.
Protection against wear.
Good thermal stability.
II. Application
Mainly blended in the formulation of the lubricant below:
Blended in the formulation of medium&heavy duty automotive gear oil.
Blended in the formulation of medium&heavy duty industrial gear oil.
III. Recommended Treat Rate
0.4%wt.-2.0%.with application.
IV. Typical Characteristics
| Item | Quality Index | Test Method | |
| Appearance | Transparent light-yellow Fluid | Visual Observation | |
| Kinematic Viscosity | (100℃)mm²/s | Actual Measurement | GB/T265 |
| Flash Point(COC) | ℃ | ≥115 | GB/T3536 |
| Sulfur Content | %.( m/m). | ≥10.00 | SH/T0303 |
| Phosphorus Content | %.( m/m). | ≥8.50 | SH/T0296 |
| Nitrogen Content | %.( m/m). | ≥1.40 | SH/T0224 |
| Moisture Content | %.( m/m). | ≤0.10 | GB/T260 |
| Mechanical Impurity | %.( m/m). | ≤0.05 | GB/T511 |
| Oil Solubility | Dissolves without layer | Visual Observation | |
| Copper Corrosion | (100℃，3h) | ≤2b | GB/T5096 |
V. Storage,Package and Transportation
Package, labeling, transportation, storage and delivery as per SH/T0164.
Transported in the clean vechicles with platfond.
The temperature should not exceed 75℃In the long term storage, the temperature should not exceed 45 ℃.
Nonflammable,nonexplosive and noncorrosive.
Packaged by galvanized drums(N.W.200kg/Drum).
